PD 1/8-0

3-Tubing 30/9/02 10:33 am Page 46 PD Caps Semirigid, encapsulant-lined, polyolefin caps Applications Features and benefits PD Caps offer an improved, inexpensive way to encapsulate crimped electrical connections, including those on motor coils. Encapsulant melts and flows to fill surface irregularities of the substrate. These vibration-proof caps are used to insulate and terminate dead-end electrical cables, fixtures, connectors, and other electrical equipment.      3:1 shrink ratio. Permanent or temporary way to terminate wires. Rapid, simple installation. Rugged protection against abrasion, vibration, and flexing. PD caps provide a splash-resistant, moistureresistant covering (but not intended for use where immersion in fluids is required). Operating temperature range Installation -55°C to 110°C Minimum shrink temperature: 125°C Minimum full recovery temperature: 135°C Available in: Americas Europe Asia Pacific    Specifications/approvals  Series UL Raychem PD Caps E85381 PD Caps SCD 600 V, 125°C 3-46 Tubing 3-Tubing 30/9/02 10:33 am Page 47 Fax-on-demand US only (800) 260-9099 Outside US (650) 257-2301 Fax ID 2110 2111 Description Data sheet SCD Visit our website at www.tycoelectronics.com Product dimensions (mm/in) Length Nominal overall as Size supplied Minimum open barrel as supplied* Inside diameter Minimum expanded as supplied Maximum recovered after heating Total wall after heating 1/8 22.0 (0.87) 12.7 (0.50) 3.2 (0.125) 0.58 (0.023) 1.22 ± 0.15 (0.048 ± 0.006) 3/16 25.4 (1.00) 15.2 (0.60) 4.8 (0.187) 1.52 (0.060) 1.57 ± 0.20 (0.062 ± 0.008) 1/4 28.4 (1.12) 15.2 (0.60) 6.4 (0.250) 2.03 (0.080) 1.98 ± 0.20 (0.078 ± 0.008) 3/8 31.8 (1.25) 18.3 (0.72) 9.5 (0.375) 2.29 (0.090) 2.08 ± 0.25 (0.082 ± 0.010) 1/2 38.1 (1.50) 21.6 (0.85) 12.7 (0.500) 2.29 (0.090) 2.54 ±0.25 (0.100 ± 0.010) Recovered wall thickness** *See glossary for definition of “barrel.” **Wall thickness will be less if recovery is restricted during shrinkage. Ordering information Color Standard Size selection Always order the largest size that will shrink snugly over the component to be covered. Black (-0) Standard packaging In pieces. Ordering description Specify product name, size and color (for example, PD Caps 1/4-0). Special order sizes are available upon request. Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. Tubing 3-47